Certified Competence for the Systems That Power America
Programs in electrical, instrumentation and control, and electronics engineering, assessed against real standards and verifiable online.
Every Certificate Has a Unique ID. Every Credential Can Be Checked.
Employers confirm ASEEE certificates and approved training centers in seconds through Certificate Check and Center Check.
From Hazardous Areas to High Voltage, Built on Real Standards
Train with approved centers in power systems, hazardous areas, calibration, safety, testing, and more, then prove your competence.
Competence You Can Verify
ASEEE designs, accredits, and certifies competency-based programs in electrical, instrumentation and control, and electronics engineering. Programs run through approved training centers, and every certificate carries a unique ID verifiable online.
Competency-Based Assessment
Online Verification
Approved Training Centers
Standards-Aligned Programs
Engineering competence, mapped end to end
From the substation yard to the hazardous-area junction box and the calibration bench — every ASEEE program is built on the standards that govern real work.
Where most careers level up
Intermediate Flagship
Cable Jointing & Termination
HV, MV & LV Cable Jointing, Termination & Splicing
Prepare, joint, splice and terminate polymeric and paper-insulated power cables from LV through HV using heat shrink and cold shri...
40 Hours · 5 Days Details
Foundation Flagship
Hazardous Areas & Explosion Protection
EX1: Explosion Protection and Electrical Installation in Hazardous Areas
Classify hazardous areas, select correctly protected Ex equipment, and install and inspect electrical systems in explosive atmosph...
40 Hours · 5 Days Details
Advanced Flagship
Power Systems & High Voltage
Advanced Power System Analysis with ETAP
Model and analyze electrical power systems in ETAP: build one-line diagrams, run load flow and short-circuit studies, coordinate p...
40 Hours · 5 Days Details
Advanced Flagship
Hazardous Areas & Explosion Protection
CompEx Ex01–Ex04 Hazardous Area Inspection & Installation
Install, inspect and maintain explosion-protected electrical equipment in gas and dust atmospheres to IEC 60079-14 and IEC 60079-1...
40 Hours · 5 Days Details
Foundation Flagship
Instrumentation, Control & Calibration
Instrumentation and Control Systems Level 1: Field Instruments
Read P&IDs, select and install pressure, level, flow and temperature instruments, and inspect field devices against specifications...
40 Hours · 5 Days Details
Intermediate Flagship
Electrical Safety & Authorization
Arc Flash Hazard Analysis and Risk Assessment
Recognize, assess and mitigate arc flash hazards by performing incident energy analysis to IEEE 1584, defining arc flash boundarie...
24 Hours · 3 Days Details
Professional Flagship
Fire & Gas Detection and Life Safety
NFPA Fire Protection Specialist
Apply NFPA codes, fire science and risk assessment to evaluate buildings and facilities, specify protection systems and prepare fo...
40 Hours · 5 Days Details
Advanced Flagship
Power Systems & High Voltage
Power System Analysis Using ETAP
Build ETAP models of industrial and utility networks and perform load flow, short circuit, motor starting, protection coordination...
40 Hours · 5 Days Details
Professional Flagship
Electrical Safety & Authorization
Senior Authorized Electrical Person
Lead, authorize and manage high-risk electrical work, including arc flash risk, live working decisions, safety documents and emerg...
40 Hours · 5 Days Details
Four steps from training to trusted credential
-
01
Enroll at an approved center
Choose a program and register with an ASEEE-approved training center near you or online.
-
02
Train against the standard
Structured modules mapped to the codes and standards that govern your work in the field.
-
03
Prove your competence
Written and practical assessments. Certificates are issued only on demonstrated competence.
-
04
Verify anywhere
Every certificate carries a unique ID that employers can confirm online in seconds.
Innovate. Educate. Empower.
Assessed, Not Just Attended
Certificates are issued only when candidates demonstrate competence in knowledge and practical assessments.
Built on Real Standards
Programs align with recognized codes and standards from bodies such as NFPA, IEEE, IEC, ISO, and OSHA.
Verifiable in Seconds
Every certificate carries a unique ID that employers can check online through Certificate Check.
Technical perspectives on standards, safety, and engineering practice
Career Pathways for E&I Technicians in the United States: From Apprentice to Authorized Person
Electrical and instrumentation (E&I) technicians keep power plants, refineries, water systems, data centers, and factories running. The work...
Calibration Traceability and ISO/IEC 17025: Building Trust in Instrument Measurements
Every control loop, safety function, and custody transfer depends on instruments telling the truth. A pressure transmitter that drifts two p...
IEC 61850 and the Digital Substation: What Protection Engineers Need to Know
For most of the last century, substation protection and control depended on copper. Hundreds of hardwired connections carried currents, volt...